The thesis deals with the microstrip filter design using defected ground structure (DGS). The difference between standard asymmetric microstrip technique and DGS is in using the structures etched in the microwave substrate ground plane. The DGS resonant characteristics are then used in filter design. The thesis consists of three factual parts. The first one (chapter 4) introduces the use of the DGS resonators in the lowpass filter design. It involves experimental analysis of one type of the lowpass filter. The second part (chapter 5) deals with a novel microstrip lowpass filter design method using DGS. The proposed method is verified by simulations and several samples are realized and measured. Finally, the third part (chapters 7 and 8) deals with the bandpass filter design using specific defected ground structure as a resonator. The resonators are used in a coupled resonator structure. Filters of various orders and resonator configurations are designed and simulated. A combination of the DGS resonators and half-wavelength microstrip resonators is introduced as well. Selected samples are realized and measurement results are compared with simulations.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233479 |
| Date | January 2009 |
| Creators | Vágner, Petr |
| Contributors | Kasal, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds