This research is inserted in the topic of timber buildings. Many construction systems are available for building using timber, with the two main systems in residential ambit being Cross Laminated Timber and Light Timber Frame. Both systems reckon on the presence of shear walls to bear the effects of horizontal loads like seismic events or wind. This thesis deals with timber shear walls, and is divided into two parts: the first part is related to the ultimate and serviceability limit states rules to be included in upcoming versions of the building codes, while the second part presents a novel use of CLT walls as seismic renovation for existing buildings, as part of a European project. The first part of the thesis, which is presented in three papers, is closely related to the process of producing new building codes, and aims at an easier integration between research and codification. The initial focus is the behaviour of Cross Laminated Timber subjected to in-plane loading. Eurocode 5 currently lacks a part concerning this product and the discussion is still ongoing regarding the methods for stresses evaluation and on the strength values to adopt for safety verifications. The first paper tackles this problem by analysing different calculation methods currently available for the evaluation of the in-plane shear stresses, a common notation is introduced in order to have a meaningful comparison between methods proposed by different authors. All methods are then applied to a real case of existing experimental data regarding a four point bending test of CLT beams. Stiffness and strength of CLT are essential parameters for the definition of models to be adopted in codes regarding timber buildings, in particular for the calculation of shear walls. Another very common timber construction system is called Light Timber Frame: an assembly comprising a timber frame and an external sheathing layer mechanically joined to the frame. Consequently LTF walls are considered, the study is directed towards shear wall models for the evaluation of deformations. The second paper focuses on the evaluation of the displacement at the top of LTF walls subjected to horizontal loads. This is a key aspect for designers, since the limitation of deformations ensures that the building retains a satisfactory performance at serviceability limit states. The displacement is due to many different contributions, with the sheathing-to-framing deformation being one of the major ones. The paper presents a comparison between two of the proposed methods to calculate the sheathing-to-framing deformation of LTF shear walls. The influence of the nail slip contribution on the overall displacement of the top of the wall is studied also with parametric analyses, by varying both mechanical properties and geometrical dimensions. Comparison with existing experimental data is also provided. The study on shear walls regards also their lateral capacity, as well as the comparison between LTF and CLT walls of equal aspect ratio and similar restraining. In the third paper, existing cyclic test data on LTF and CLT walls were used to study the different displacement contributions and estimate the influence of the hold-down on the lateral response of the walls. A simplified capacity model is proposed for the walls, based solely on the hold-down forces. The second part of the thesis deals with the use of CLT shear walls as a mean for the retrofit of existing buildings. The need for sustainable renovation solutions and improvement of the performance of existing buildings is at the base of the European project e-Safe. The project presents a multidisciplinary approach on building renovation, from mechanical, energetic, technological and architectural point of view. In this thesis the focus is on the seismic retrofit system called e-CLT: a CLT panel is attached to the outside of existing buildings with a novel connector that acts as a friction dissipation device, thus offering additional energy dissipation in case of strong earthquakes. The fourth paper presents the first experimental campaign on this novel friction connector. Different geometries for the connector are studied and optimised, before being tested under cyclic protocol. The connector is tested on a steel setup, in order to isolate the friction behaviour and study the stability of the hysteresis loops. The results permitted to acquire new information useful for further developments on the system. The fifth paper presents a subsequent experimental campaign on the friction connector. The shape is changed and improved in light of the previous results. The setup is improved and includes also a screw connection between friction connector and CLT panel. The goal is to study the influence of the timber connection on the friction dissipative performance. An analytical model is proposed, fitted on the experimental data.
| Identifer | oai:union.ndltd.org:unitn.it/oai:iris.unitn.it:11572/361422 |
| Date | 15 December 2022 |
| Creators | Boggian, Francesco |
| Contributors | Boggian, Francesco, Tomasi, Roberto |
| Publisher | Università degli studi di Trento, place:TRENTO |
| Source Sets | Università di Trento |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | firstpage:1, lastpage:229, numberofpages:229 |
Page generated in 0.002 seconds