This diploma thesis deals with an application of the finite element method on elastohydrodynamic (EHD) lubrication simulations. Commercially available software COMSOL is used for the computation, while two different modules for modeling EHD lubrication are described in a detail. Firstly, a new approach using the module Thin-Film Flow is developed, considering and describing some limitations of this approach. This is the very first published work dealing complex with EHD simulation in Thin-Film Flow module. In the second part of the thesis, there was created a model of line contact using the module for the introduction of partial differential equations (PDE). The model is partially verified with available works for different values of the input parameters. Subsequently, the velocity effect of the contact surfaces on the pressure and the lubricant thickness in contact is analyzed. Finally, the last part is examines the influence of the values of some parameters on the final value of the contact pressure and the lubricant thickness, as well as on numerical stability of the entire model.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231788 |
Date | January 2015 |
Creators | Brhlík, Rostislav |
Contributors | Hartl, Martin, Nečas, David |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0132 seconds