This doctoral thesis presents the results of the development of two software programs for the design of progressive distributors and progressive lubrication systems. One of these programs implements a genetic algorithm and the other, which is used to design progressive lubrication systems, implements a parallel genetic algorithm of the island model. The program for the design of progressive distributors was implemented in Java using the NetBeans development environment and the other program was created in Matlab. The thesis further focuses on analytical and computational solutions of the flow of compressible greases seen as viscoplastic fluids. Equations for the numerical solution of the non-steady flow of compressible viscoplastic Bingham fluids were derived and solved by the Lax-Wendroff method in Matlab. As several constants had to be set in the equations, experiments were conducted with the ecological grease Plantogel 2S in the laboratory of the Kaplan Department of Hydraulic Machines, mainly to determine the sound velocity in this grease. The sound velocity was calculated based on the experimental results by applying Fourier transformation and the transition matrix method. In addition to this, the rheological measurements of greases were used. As seen from the results, the ecological greases are actually thixotropic viscoplastic fluids with a significant elastic element. Since a Newton fluid was assumed when calculating the sound velocity, the possibilities of using the transition matrix method for viscoplastic fluids were then considered. No analytical solution of the flow of viscoplastic fluids in a frequency spectrum has been published so far. Because it emerged that greases had a significant elastic stress factor, the problem of the non-steady flow of elastic-viscoplastic fluids was solved numerically between two infinite parallel plates by applying the finite difference method (FDM). The computation was done in Matlab. This doctoral thesis makes a contribution to solving problems related to the design of progressive distributors and progressive lubrication systems used to distribute compressible greases. Considering the complex approach to this field and the achieved results, the thesis also represents a significant contribution to design work.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233921 |
Date | January 2010 |
Creators | Vepřek, Jiří |
Contributors | Pavlok, Bohuslav, Bauer, František, Habán, Vladimír, Nevrlý, Josef |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0112 seconds