Glare is an important, but often overlooked parameter in lighting systems design. This parameter can significantly affect human biorhythm, causing a discomfort or in the worst cases it can dazzle drivers, which can lead to car accidents. Therefore, it´s necessary for lighting designers to consider glare in their designs, specifically threshold increment value. This thesis focuses on glare measurement caused by exterior lighting systems and comparison of usage different types of camera lens for threshold increment measurements with luminance analyser. For a better understanding of the whole issue, there is a part describing how human eye perceives light, which is followed by definition and division of the glare. Afterwards, there is part describing calculation procedure of the threshold increment, which serves as a basis for the practical part of the thesis. Practical part of the thesis is dedicated to experimental measurement of glare from exterior lighting system on Technická street, right behind VUT FEKT T12 building. The measurement is done using luminance analyser and the LumiDISP program, while 3 lenses are used for the measurements. The output of this thesis are values of threshold increment obtained by using 4 different methods (3 lenses) and subsequent comparison of the suitability of the lenses for the glare measurements. To supplement, a simulation of the measured lighting system in the Relux program and a subsequent comparison of the results with the measured values are performed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442545 |
Date | January 2021 |
Creators | Rampák, Dominik |
Contributors | Baxant, Petr, Škoda, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Slovak |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.2801 seconds