This thesis investigates the feasibility of producing electricity and cooling simultaneously utilising low-grade heat sources by incorporating an expander within the adsorption cooling system or by integrating an Organic Rankine Cycle with water adsorption cooling system. Advanced physical adsorbent materials have been investigated for the first time to generate cooling and electricity simultaneously utilising CPO-27(Ni), MIL101(Cr), and AQSOA-Z02 and compared to commonly used Silica-gel. Two innovative configurations of water adsorption systems for cooling and electricity were investigated. In the first configuration, the two-bed basic adsorption cooling system (BACS) is improved by including an expander within the system. In the second configuration, the BACS and ORC cycle are integrated. Four different scenarios of systems integration based on the way of powering the ORC and the adsorption system were investigated. Also, detailed CFD simulations of small-scale radial inflow turbines are developed for both configurations. Also, a novel experimental facility is developed to integrate ORC with two-bed adsorption cooling system to validate the numerical models and proof the concept of producing power as well as cooling, where maximum specific cooling power of 252 W/kgads and specific power and of 162 W/kgads can be achieved with maximum deviation of less than 17%.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:760503 |
| Date | January 2018 |
| Creators | Al-Mousawi, Fadhel |
| Publisher | University of Birmingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.bham.ac.uk//id/eprint/8641/ |
Page generated in 0.0111 seconds