Return to search

Modeling Watershed-Wide Bioretention Stormwater Retrofits to Achieve Thermal Pollution Mitigation Goals

Stream ecosystems are increasingly at risk for thermal impairment as urbanization intensifies, resulting in more heated runoff from impervious cover that is less likely to be cooled naturally. While several best management practices, including bioretention filters, have been able to reduce thermal pollution, success has been limited. The extent of thermal mitigation required to prevent ecological damage is unknown. A calibrated runoff temperature model of a case study watershed in Blacksburg, VA was developed to determine the cumulative treatment volume of bioretention filters required to reduce thermal impacts caused by runoff from development in the watershed to biologically acceptable levels. A future build out scenario of the study watershed was also analyzed. Results from this study established that runoff thermal pollution cannot be fully reduced to goal thresholds during all storms using bioretention filter retrofits. While retrofitting significantly decreased temperatures and heat exports relative to the controls, increasing treatment volumes did not really enhance mitigation. Alternate thermal mitigation methods which actively remove runoff volume should be considered where more thermal mitigation is required. / Master of Science / Stream temperature is a significant ecological, biological, and chemical property affecting the long-term health of streams. However, as development intensifies, stream ecosystems are increasingly at risk of being damaged by thermal pollution, which causes warmer and less stable temperatures that distress aquatic organisms. While several stormwater management methods that reduce runoff-related pollution, known as best management practices (BMPs), were found to also decrease thermal pollution, their success has been limited. Furthermore, the extent of thermal mitigation required to prevent ecological damage is unclear. This study aimed to determine how much treatment by a popular BMP, the bioretention filter, was necessary across a watershed in Blacksburg, VA to adequately reduce thermal pollution to protect stream health. Mitigation impacts were tested on both existing and predicted future development conditions through model simulations. Results from this study established that thermal pollution from runoff cannot be fully reduced to goal thresholds consistently using bioretention filter retrofits. While retrofitting significantly decreased thermal pollution, increasing treatment volume did not considerably enhance mitigation. Results suggested that bioretention filters are not an effective method, and alternate thermal mitigation practices which actively remove runoff volume should instead be considered where intensive reductions in thermal pollution are necessary.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/97566
Date08 April 2020
CreatorsChen, Helen Yuen
ContributorsCivil and Environmental Engineering, Dymond, Randel L., Young, Kevin D., Hodges, Clayton Christopher
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0022 seconds