Advanced dispersants were discovered for the fabrication of homogeneous suspensions of multi-walled carbon nanotubes (MWCNT), graphene, and manganese dioxide (MnO2) in both ethanol and water. Thin films of MWCNT, graphene, MnO2, composite films of MWCNT-MnO2 and MWCNT-graphene were prepared using electrophoretic deposition (EPD) and electrolytic deposition (ELD) methods. The mechanisms of dispersion and deposition were investigated. Cathodic EPD was achieved for MWCNT and graphene using positively charged dispersants. Co-deposition of MWCNT and MnO¬2 was performed using a co-dispersant, which dispersed both MWCNT and MnO2 in ethanol. Composite films were tested for electrochemical supercapacitor (ES) purposes.
Pulse ELD was used to deposit porous MnO2 coatings on Ni foam substrates from KMnO4 solutions. Cathodic deposition offered advantages, compared to anodic deposition, because the problems, related to anodic dissolution of metallic substrates, can be avoided. The pulse ON/OFF times had significant influence on the morphology and structure of MnO2 films, which further determined the capacitive performance. The influence of MnO2 film thickness on specific capacitance was investigated.
Porous and conductive vanadium nitride (VN) was synthesized using melamine as a reducing agent. To further improve film conductivity and specific surface area, MWCNT were incorporated into VN matrix during synthesis. VN-MWCNT composite electrodes and VN-MWCNT/MnO2-MWCNT asymmetric supercapacitor cells were fabricated and tested. The electrodes and cells exhibited excellent electrochemical capacitive performance with good cyclic stability. The asymmetric supercapacitor device showed a voltage window up to 1.8 V, which was the combination of voltage window of VN-MWCNT (-0.9 V--0 V) and MnO2-MWCNT (0 V--0.9 V).
Polypyrrole (PPy) coated MWCNT were synthesized in ethanol with ammonium peroxydisulfate solution as an oxidant. The effects of dopants to PPy morphology and conductivity was investigated. Dopants with electrochemical active groups were selected for the synthesis of PPy nanoparticles, where dopants also contributed to the capacitance of the polymer based materials. Both PPy-MWCNT/PPY-MWCNT symmetric supercapacitors and VN-MWCNT/PPY-MWCNT asymmetric supercapacitors were fabricated and tested, where the voltage windows were 0.9 V for the former and 1.3 V for the later. The increase of voltage window was ascribed to the asymmetric structure and negative voltage window of VN-MWCNT composite. / Thesis / Doctor of Philosophy (PhD)
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/17409 |
Date | 06 1900 |
Creators | Su, Yisong |
Contributors | Zhitomirsky, Igor, Materials Science and Engineering |
Source Sets | McMaster University |
Language | en_US |
Detected Language | English |
Type | Thesis |
Page generated in 0.0023 seconds