his Disertation thesis involves the creating of the simulation model of the C axis drive over mentioned machine and them verification on the prototype of this machine. C axis is controlled with position feedback. Simulation model was created before the realisation of the machine prototype for the preliminary identification of the dynamic behaviours in the working cycles and them opportunity of the realisation this conception. C axis is constructed with worm gear and is controlled with help of Master-Slave drive. This torque drive eliminates the production backlash in the worm gear. The multifunction turning center, where is used this C axis, is determinate for heavy duty roughing cutting of the forged peaces, where is problem with dynamic stability of the cutting process. Simulation model includes the problems with multi-body mass system, friction on the worm gear, self locking, damping on the worm gear and the optimization of the parametrs for many regulators. Simulation model was verified on the prototype of the machine. Achieved results bring the new knowledge, which are used for simulation complicated machine nodes and this knowledge is used for research and developing of the similar mechatronics system.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233982 |
| Date | January 2011 |
| Creators | Křepela, Jan |
| Contributors | Marek, Jiří, Souček, Pavel, Brychta, Zdeněk, Singule, Vladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds