<p>The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. </p><p>The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled. All measurements on the radio front-end and the test components are made using a network analyser, in order to measure the S-parameters. </p><p>This diploma work has resulted in a functional design and prototype, which has proved that designing systems for 5 GHz on a laminate substrate is possible but by no means trivial.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-2635 |
| Date | January 2004 |
| Creators | Backström, Anders, Ågesjö, Mats |
| Publisher | Linköping University, Department of Science and Technology, Linköping University, Department of Science and Technology, Institutionen för teknik och naturvetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.002 seconds