Titanium (Ti) foams of different densities 1622-4100 Kgm-3 made by a powder sintering technique were studied as to their structural and mechanical properties. The foams were tested under static and dynamic loading. The material was tested quasi statically and dynamically under strain rates in the range of 0.001-2500 s-1 and under different loading modes. It was found that strain rate sensitivity is more pronounced in lower density foams. Experiments were complimented by virtual testing. Based on the Voronoi tessellations a computational method was developed to generate stochastic foam geometries. Statistical control was applied to produce geometries with the microstructural characteristics of the tested material. The generated structures were numerically tested under different loading modes and strain rates. Voronoi polyhedrals were used to form the porosity network of the open cell foams. The virtually generated foams replicated the geometrical features of the experimentally tested material. Meshes for finite element simulations were produced. Existing material models were used for the parent material behaviour (sintered Ti) and calibrated to experiments. The virtual foam geometries of different densities were numerically tested quasi statically under uniaxial, biaxial and triaxial loading modes in order to investigate their macroscopic behaviour. Dynamic loading was also applied for compression. Strain rate sensitive and insensitive models were used for the parent material model in order to examine the influence of geometry and material strain rate sensitivity under high rates of deformation. It was found that inertial effects can enhance the strain rate sensitivity for low density foams and numerical predictions for the generated foam geometries were in very good agreement with experimental results. Power laws were established in scaling material properties with density. The study includes: 1. Information on the material behaviour and data for macroscopically modelling this type of foams for a range of densities and under different strain rates. 2. A proposed method for virtually generating foam geometries at a microscopic scale and examine the effect of geometrical characteristics on the macroscopic behaviour of foams.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:604507 |
| Date | January 2014 |
| Creators | Siegkas, Petros |
| Contributors | Petrinic, Nik; Tagarielli, Vito |
| Publisher | University of Oxford |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://ora.ox.ac.uk/objects/uuid:68938d12-d104-4637-8b08-d1c126ddca84 |
Page generated in 0.0601 seconds