A novel technique by employing a capacitance displacement measurement system to measure the post-weld-shift (PWS) caused by laser welding in the butterfly-type laser diode module packaging process is proposed. Reduction of the PWS is an important issue in developing low-cost and high-performance semiconductor laser module. Prior to the reduction and compensation of the PWS, a measurement system of PWS must be constructed.
In comparison to the high-magnification camera with image capturing system (HMCICS) limited in resolution of 0.07£gm due to its pixels, a measurement system with a higher resolution of 0.0254£gm is used. During the measurement procedure, the PWS of the ferrule probed by the sensors is converted into the fiber misalignment shifts. The coupling efficiency can be improved over 70% after compensation. The result indicates that the PWS can be qualitatively measured and quantitatively computed.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0724107-150045 |
| Date | 24 July 2007 |
| Creators | Hu, Feng-ruei |
| Contributors | M. T. Sheen, Y. C. Shu, Y. C. Tsai, W. H. Cheng, J. H. Kuang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0724107-150045 |
| Rights | off_campus_withheld, Copyright information available at source archive |
Page generated in 0.0016 seconds