The goal of this master’s thesis was design of the inspection procedure for hammer and trigger of the specific revolver model. Thesis was developed in cooperation with the manufacturer of the revolvers. The theoretical part deals with the MSA methodology, which is used to assess acceptability of measurement systems. The practical part describes the current measurement system and performs gage repeatability and reproducibility study. It was confirmed that the current measurement system requires improvement. Subsequently coordinate systems were designed, based on functional features of the hammer and trigger. Automated optical measurements, based on the coordinate systems, were performed. The results from these measurements were again assessed by the gage R&R study. The analysis confirmed improvement of acceptability of the designed measurement systems. Based on these results, it is recommended to apply suggested procedures in practice. Results and recommendations of this master’s thesis can contribute to develop metrology in the company and improve the existing measurement system.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417743 |
| Date | January 2020 |
| Creators | Úlehlová, Eva |
| Contributors | Šrámek, Jan, Jankových, Róbert |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds