This diploma thesis deals with design of axle carrier for Formula Student. The axle carrier is topologically optimized and additively manufactured with Selective Laser Melting technology. Material for its production is aluminium alloy AlSi10Mg, which has worse mechanical properties than commonly used high-strength alloys. Therefore the aim was, by using topology optimization, to design a component, which would have comparable properties with milled component. The stress strain analysis was carried out by the finite element method and maximum deformation and safety coef-ficients were acquired. The prototype was made and its dimensions were controlled by optical digitization, which proved accuracy of manufacturing. The strength calcu-lations were verified by special testing device and photogrammetry measurement. The load during the tests was 20 % higher than in the analysis and no limit state was observed. This verified its safety and functionality.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318691 |
Date | January 2017 |
Creators | Vaverka, Ondřej |
Contributors | Růžička, Bronislav, Koutný, Daniel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds