Return to search

Vývoj procesních parametrů slitiny mědi pro 3D tisk tenkostěnných struktur / Process parameters development for copper thin walls manufacturing via 3D printing

In the work is used the processing of metallic material by the method of Selective Laser Melting. The main objective is to verify and describe the influence of the individual process parameters entering the production process when processing the alloy Cu7.2Ni1.8Si1Cr with SLM. This alloy contains 90 % copper. The first theoretical part of the thesis describes so far processed copper alloys with a high content of copper using the method of Selective Laser Melting. The practical part then deals with the specification of the main process parameters, which are optimized in the next part of the work solution. On the basis of the information obtained experimental bodies have been created, which will be tested and analyzed in several steps. The work focuses on thin-walled samples, which have a perspective use in the creation of highefficiency heat exchangers. The main results that the work deals with are the relative density and mechanical properties of the material. Also, great emphasis is placed on the resulting surface quality

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379039
Date January 2018
CreatorsKlimek, Ľubomír
ContributorsHutař, Pavel, Paloušek, David
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds