Made available in DSpace on 2014-12-17T14:07:17Z (GMT). No. of bitstreams: 1
KesiaKOS_TESE_PARCIAL.pdf: 625810 bytes, checksum: ba2f0bf53a4151666220c09ffd2f2947 (MD5)
Previous issue date: 2013-07-01 / Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350?C-2H, 1,450?C-30M, 1,450?C-2H, 1,475?C-30M and 1,475?C-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80% / A produ??o t?xtil tem sido considerada uma atividade de alto impacto ambiental, devido ? gera??o de grandes volumes de rejeitos com alta carga de compostos org?nicos e efluente fortemente colorido, t?xico e dif?cil biodegradabilidade. O presente trabalho trata da obten??o de membranas cer?micas porosas de alumina para filtra??o de efluente industrial t?xtil na remo??o de contaminantes, em especial, cor e turbidez. Utilizou-se dois tipos de alumina com granulometrias diferentes como base para o preparo de formula??es de massas cer?micas para a produ??o dos corpos de prova e membranas. As propriedades tecnol?gicas dos corpos de prova foram avaliadas ap?s suas sinteriza??es nas condi??es de: 1.350?C 2H, 1.450?C 30M, 1.450?C 2H, 1.475?C 30 M e 1.475?C 2H. Foram caracterizadas por DRX, FRX, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, MEV e Porosimetria por Intrus?o de Merc?rio. Ap?s essa caracteriza??o definiu-se uma membrana padr?o, com a sua respectiva condi??o de sinteriza??o, para os ensaios de filtrabilidade. O efluente foi fornecido por uma Ind?stria t?xtil do RN, e caracterizado nos pontos de entrada e sa?da da ETE. Utilizou-se um tratamento estat?stico dos resultados analisados no efluente atrav?s dos seguintes par?metros: pH, temperatura, CE, SS, SD, ?leos e graxas, turbidez, DQO, OD, f?sforo total, cloretos, fen?is, metais e coliformes termotolerantes. O permeado (EF) foi avaliado pelos mesmos par?metros. Os resultados obtidos demonstram a viabilidade no uso de membranas cer?micas porosas de alumina na remo??o de contaminantes de efluente industrial t?xtil, com melhor tamanho m?dio de poro de 0,4?m (faixa de distribui??o de tamanhos de poros variando de 0,025 a 2 ?m), com porosidade total de 29,66%, com percentuais m?dios de efici?ncia na remo??o de cor de 89,02%, SS de 92,49%, turbidez de 94,55%, metais variando de 2,70% (mangan?s) at? 71,52% (ferro) de acordo com cada metal e remo??o de DQO de 72,80% / 2020-01-01
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/12837 |
| Date | 01 July 2013 |
| Creators | Souto, K?sia Karina de Oliveira |
| Contributors | CPF:06296687877, http://lattes.cnpq.br/2365059843175411, Nascimento, Jos? Heriberto Oliveira do, CPF:02452573493, http://lattes.cnpq.br/7033735079037677, Ladchumananandasivam, Rasiah, CPF:18222161415, http://lattes.cnpq.br/8553209522282182, Santos, Andarair Gomes dos, CPF:02813010421, http://lattes.cnpq.br/3470634368296605, Brito, Luiz Pereira de, CPF:08607249487, http://lattes.cnpq.br/4719691319300166, Paskocimas, Carlos Alberto |
| Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Ci?ncia e Engenharia de Materiais, UFRN, BR, Processamento de Materiais a partir do P?; Pol?meros e Comp?sitos; Processamento de Materiais a part |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | Portuguese |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis |
| Format | application/pdf |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/embargoedAccess |
Page generated in 0.0019 seconds