Return to search

Towards an Integrated Water Quality Monitoring System Using Low Cost Electrochemical Sensors

The monitoring of pharmaceuticals, heavy metal, pH and free chlorine concentration in drinking water is important for public health and the environment. However, conventional laboratory-based analytical methods are labor-intensive, expensive, and time consuming. This thesis focuses on developing an integrated, highly sensitive, easy-to-use, and low-cost pharmaceuticals, heavy metal, pH and free chlorine sensing system for drinking water quality monitoring.
A low-temperature, solution-processed modification of multi-walled carbon nanotubes (MWCNT) with β-cyclodextrin (βCD) on glassy carbon electrode is developed for detecting low levels of acetaminophen. The adsorption properties of βCD are combined with the high surface area of carbon nanotubes towards enhanced electrochemical sensing of acetaminophen with a limit of detection of 11 nM and linear range from 0.05-300 μM. Also, a systematic investigation is carried out using four types of modified MWCNT-βCD. A novel, one-step approach called Steglich esterification modified MWCNT-βCD results in large effective surface area, and fast electron transfer towards sensitive detection of acetaminophen and 17β-estradiol (E2, primary female sex hormone) in the range of 0.005–20 and 0.01–15 μM, with low detection limits of 3.3 and 2.5 nM, respectively. The similar MWCNT-βCD modified electrodes can also detect heavy metal ion (lead, Pb2+) with a limit of detection of <10 ppb. Low frequency noise behavior of these sensors are studied.
A spin-coated Pd/PdO based pH sensor, and amine-modified carbon electrode-based free chlorine sensor are fabricated on a common substrate together with the pharmaceuticals and heavy metal sensors. A Wheatstone-bridge temperature sensor is fabricated based on silicon and PEDOT:PSS on another substrate. All the sensors are connected to an Arduino microcontroller based data acquisition system with a smartphone application interface. The integrated sensing system is easy-to-use, low-cost, and can provide accurate monitoring data with real drinking water samples. / Dissertation / Doctor of Philosophy (PhD) / Low-cost, easy-to-use, and sensitive monitoring system for pharmaceuticals, heavy metal, pH and free chlorine in drinking water is crucial for public health safety. In this thesis, we develop solution-based synthesis of multi-walled carbon nanotubes modified by β-cyclodextrin for electrochemical sensing of pharmaceuticals and heavy metal. The modification approaches are compared and characterized to analyze their electrochemical behavior and sensing performances. The developed sensors are highly sensitive toward the detection of acetaminophen (a widely used pain-killer) and estrogen hormone in drinking water. We also develop a modified spin-coating technique to deposit palladium/palladium oxide films for potentiometric pH sensor, a calibration-free free chlorine sensor based on modified carbon electrode, and a resistive temperature sensor. The developed pH, free chlorine and temperature sensors are highly sensitive, and stable with fast response time. All the sensors are integrated and interfaced with a custom-made and smartphone-controlled electronic readout system for accurate and on-site drinking water quality monitoring at low cost.

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/27630
Date January 2019
CreatorsAlam, Arif Ul
ContributorsHowlader, Matiar M R, Deen, M Jamal, Electrical and Computer Engineering
Source SetsMcMaster University
LanguageEnglish
Detected LanguageEnglish
TypeThesis

Page generated in 0.0027 seconds