Resin composites have been in the dental field for over forty years. They are now thought to be the most commonly used restorative material due to their aesthetic and mechanical properties. Although resin composites have high success rates as restorations, they do not offer all properties of an ideal restorative material. The aims of this research were to characterise the effects of variation in resin composite formulation on handling, mechanical; and physical properties. In particular the influence of the size and distribution of the inorganic components was investigated through the study of experimental formulations. Packing stress and viscosity were assessed with pentrometer principle at two different temperatures (23 and 37 ºC). It was found that filler size was strongly correlated with both packing stress and viscosity. Additionally, temperature has a dominant effect on packing stress and viscosity. Micro computed tomography [μCT] was used to investigate percentage of voids [% voids] in 3D dimensions. It was found that smaller filler size incorporated less % voids. In contrast filler size and disruption had a little effect on fracture toughness of resin composites. 3D surface topography was used to investigate the surface roughness before and after tooth brush abrasion. It was found filler size had a significant influence in both gloss retention and surface roughness (smaller filler size exhibited higher surface gloss). Finally, the effect of different storage media (distilled water, Coca Cola and red wine) on colour stability and gloss were investigated. It was found that dietary habits effect discolouration of resin composite restorations with the acidic drinks caused more staining.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:553477 |
| Date | January 2012 |
| Creators | Elbishari, Haitham Idris |
| Contributors | Satterthwaite, Julian; Silikas, Nikolaos |
| Publisher | University of Manchester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.research.manchester.ac.uk/portal/en/theses/characterisation-of-the-effect-of-filler-size-on-handling-mechanical-and-surface-properties-of-resin-composites(64a8b96f-1cd0-459c-9865-1c5f35567982).html |
Page generated in 0.0021 seconds