This master´s thesis deals with bismuth low temperature solder pastes. Describes the properties of bismuth solder pastes. It shows the process of manufacturing a printed circuit board for test. The thesis also characterizes laboratory temperature profile setting for the BiSn soldering pastes. Solder paste printing and placement 0 ohm rezistors to printed circuit boards with different surface finishes in the manufacturing plant. Setting of solder profiles for low soldering pastes in reflow oven. Testing resistence of mounted zero resistor on the test board at different aging temperature were analysed. Resistance measurement after a specified time. Testing of solder joint strenght of printed circuit boards for different surface treatments. Changes in structure wereanalysed on microsections for solder pastes.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399588 |
Date | January 2019 |
Creators | Švéda, Miloš |
Contributors | Zatloukal, Miroslav, Starý, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0071 seconds