The thesis deals with design of the device for monitoring four signals from the probes for scanning ECG, PPG and heart pressure. The thesis is mainly focused on hardware design of the device and the most important part is the selection of the storage media to which will be the data recorded and the selection of the microprocessor which has to be able to meet the requirements of the device. For the data recording is used SD card and the ARM based MCU was selected from the AT91SAM7S series. This thesis also deals with the software design for MCU which is needed to launch the device and with design of PC applications used for setting the device and for downloading the measured data. At the end there are presented results of the constructed device.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220662 |
| Date | January 2014 |
| Creators | Majerík, Peter |
| Contributors | Strašil, Ivo, Číž, Radim |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds