A dissertation submitted to the faculty of engineering, University of the Witwatersrand, Johannesburg, in partial fulfilment for the degree of master of science in engineering
JULY, 1984 / It is economically desirable to build dumps of coarse mine waste
as high a, possible. A review of available literature indicated
that a significant decrease in the strength of coarse material
occurs at high stress levels. A literature survey was conducted
to establish possible dump failure modes and methods of slope
stability analysis appropriate to dumps.
Consolidated, drained triaxial tests on several mine waste materials
have shown that above a normal stress of 1600 kPa, slight curvature
of the Mohr strength envelope occurs. However, sample stability
analyses show that there is little or no difference in factors of
safety for typical dump slopes, obtained by using a constant
average friction angle, or by using variable friction angles derived
from a power equation which describes the curved strength envelope.
Thus it is concluded that the curvature of the strength envelope,
has little influence on the factor of safety of dump slopes.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/18203 |
| Date | 07 August 2015 |
| Creators | Hughes, Trevor Stuart |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
Page generated in 0.0017 seconds