Return to search

Produktion av polyhydroxyalkanoater (PHA) av avloppsvatten från massa och pappersindustri : En studie kring bakteriernas förmåga att ackumulera PHA beroende på sammansättning av karboxylsyror / Production of polyhydroxyalkanoates (PHA) from wastewater from pulp and paper industry : A study on the ability of bacteria to accumulate PHA depending on the composition of carboxylic acids

Since the beginning of the 20th century plastic has been a widely used material, which has resulted in large quantities of plastic being produced in the last century. The plastics of today are mainly produced from fossil raw materials, which gives it a high climate impact. Plastic also has a long service life, which creates problems with handling after the new period when new plastic is produced at a faster rate than plastic debris can be recycled or incinerated. One possible approach is to switch from plastic from fossil sources to bioplastics, which is produced by renewable sources. This means a reduction in the environmental impact as the amount of fossil CO2 emissions from combustion of plastics would decrease. Polyhydroxyalkanoates (PHAs) are created by short volatile fatty acids (VFAs) added to bio sludge from a wastewater treatment plant at a pulp and paper mill where there is a lot of bacteria and microorganisms. Some of the bacteria in the sludge have the ability to accumulate PHA when VFA is added in excess and then be able to use it as an energy and carbon source in cases of starvation. This means that PHA produced in this way can be degraded by bacteria making it biodegradable while having similar properties as oil-based plastics. Production of PHA is currently expensive as it is often necessary to purchase VFA for production. To make it economically sustainable to replace oil-based plastics with PHA, the cost of PHA production must therefore be reduced. This can be done by using mixed bacterial cultures from, for example, industrial wastewater treatment plants and by creating their own composition of VFA through fermentation. At the paper mill at BillerudKorsnäs Gruvön there are several process streams that today are led to the water treatment plant, one of which is from PM6 (Paper Machine 6). By fermenting that stream, VFA can be formed with a composition of acetic acid, propionic acid, and butyric acid. The current may thus be suitable to use as a substrate in PHA production. Another way to produce VFA is to ferment the residual flow from hydrothermal carbonation (HTC) of bio sludge. According to (Samorì et al., 2019), acetic acid, butyric acid and valeric acid are formed, which means that even this stream may be suitable as a substrate for PHA production. The purpose of this thesis is to investigate the effects of the composition of VFA on the production of PHA from forest industrial bio sludge. The study covers two different cases, Case PM6 and Case HTC, where two different types of composition of VFA are added to paper sludge from the paper mill. The experiments were performed in cylindrical tanks on three occasions where the first two experiments had a volume of 30 liters and the last experiment a volume of 10 liters. On the first occasion, the maximum accumulation rate in the growth phase was studied. In the second instance, a high accumulation rate was sought, but also survival after the growth phase. The first two trials were batch trials where the sludge was dosed until saturation was achieved. On the third occasion, the possibility of carrying out PHA production with a continuous sludge exchange was studied. The experiments were analyzed by FTIR which provided information on the absorbance of the sludge which shows how the PHA concentration increased during the course of the experiments. Extractions were then performed to obtain the concentration of PHA that eventually accumulated in the sludge. The results show that biomass from BillerudKorsnäs Gruvön's mills accumulated PHA faster with VFA composition from fermented PM6 effluent compared to VFA composition from fermented HTC condensate. Calculations made with input from the experiments indicate that it is possible to produce a larger amount of PHA per year with Case PM6. The conclusion is therefore that Case PM6 is preferable if as large a PHA production as possible wants to be achieved. Case HTC is instead preferred if reduced PHA production can be tolerated in favor of biocarbon production.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-80660
Date January 2020
CreatorsAugustsson, Jimmy, Högfeldt, Jonathan
PublisherKarlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.003 seconds