The convenience of Operational Modal Analysis (OMA), over conventional Experimental Modal Analysis (EMA), has seen to its increasing popularity over the last decade for the purpose of evaluating dynamic properties of structures. OMA features an advantage of requiring only output information, which is in tandem with its main drawback of lacking scaled modeshape information. While correctly scaled modeshapes can be assumed under a restrictive assumption of spectrally white inputs, in reality, input spectra are at best broadband in nature. In this thesis, an OMA method for Multiple-Input Multiple-Output (MIMO) applications in mechanical structures is developed. The aim is to separate MIMO responses into a collection of Single-Input Single-Output (SISO) processes (matrix FRF) using cepstral-based methods, under less restrictive and hence more realistic coloured broadband excitation. Existing cepstral curve-fitting techniques can be subsequently applied to give regenerated FRFs with correct relative scaling. This cepstral-based method is based on the matrix Mean Differential Cepstrum (MDC) and operates in the frequency domain. Application of the matrix MDC onto MIMO responses leads to a matrix differential equation which together with the use of finite differences, directly solves or identifies the matrix FRF in a propagative manner. An alternative approach based on whitened MIMO responses can be similarly formulated for the indirect solution of the matrix FRF. Both the direct and indirect approaches can be modified with a Taylor series approximation to give a total of four propagative solution sequences. The method is developed using relatively simple simulated and experimental systems, involving both impulsive and burst random excitations. Detailed analysis of the results is performed using more complicated Single-Input Multiple-Output (SIMO) and MIMO systems, involving both driving and non-driving point measurements. The use of the matrix MDC method together with existing cepstral curve-fitting technique to give correct relative scaling is demonstrated on a simulated MIMO system with coloured inputs. Accurate representation of the actual FRFs is achieved by the matrix MDC technique for SIMO set-ups. In MIMO scenarios, excellent identification was obtained for the case of simulated impulsive input while the experimental and burst random input cases were less favourable. The results show that the matrix MDC technique works in MIMO scenarios, but possible noise-related issues need to be addressed in both experimental and burst random input cases for a more satisfactory identification outcome.
Identifer | oai:union.ndltd.org:ADTP/215465 |
Date | January 2007 |
Creators | Chia, Wee Lee, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | http://unsworks.unsw.edu.au/copyright, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0145 seconds