Return to search

Effective vibro-acoustical modelling of rubber isolators

This thesis, gathering four papers, concerns the enhancement in understanding and modelling of the audible dynamic stiffness of vibration rubber isolators including experimental measurements. Paper A studies the performances of three different types of vibration isolator using an indirect measurement technique to estimate the blocked dynamic transfer stiffness of each specimen. The measurements are performed over a wide audible frequency range of 200 to 1000 Hz in a specially designed test rig enabling the investigation of arbitrary preload influences. Paper B addresses the modelling of the audible-frequency stiffness of the rubber conical mount experimentally appraised in Paper A accounting for preload effects. The model is based on a simpliflied waveguide approach approximating the nonlinearities attributed to the predeformations by adopting shape factor considerations. The carbon black filled rubber is assumed incompressible, displaying a viscoelastic behavior based on a fractional derivative Kelvin-Voigt model efficiently reducing the number of required material parameters. In Paper C the focus is on the axial dynamic stiffness modelling of an arbitrary long rubber bushing within the audible frequency range. The problems of simultaneously satisfying the locally non-mixed boundary conditions at the radial and end surfaces are solved by adopting a waveguide approach, using the dispersion relation for axially symmetric waves in thick-walled infinite plates, while fulfilling the radial boundary conditions by mode-matching. The results obtained are successfully compared with simpliflied models but display discrepancies when increasing the diameter-to-length ratios since the influence of higher order modes and dispersion augments. Paper D develops an effective waveguide model for a pre-compressed cylindrical vibration isolator within the audible frequency domain at arbitrary compressions. The original, mathematically arduous problem of simultaneously modelling the preload and frequency dependence is solved by applying a novel transformation of the pre-strained isolator into a globally equivalent homogeneous and isotropic configuration enabling the straightforward application of a waveguide model to satisfy the boundary conditions. The results obtained present good agreement with the non-linear finite element results for a wide frequency range of 20 to 2000 Hz at different preloads. / QC 20101001

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-266
Date January 2005
CreatorsCoja, Michael
PublisherKTH, MWL Marcus Wallenberg Laboratoriet, Stockholm : KTH
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-AVE, 1651-7660 ; 2005:25

Page generated in 0.0026 seconds