Economic, environmental and engineering benefits promote the rapid implementation of WMA technologies. However, concerns remain based on changes in the production process that may lead to moisture susceptibility in the early life as compared to HMA. To evaluate WMA moisture susceptibility during this critical period, standard laboratory tests were used for three field projects each with an HMA control mixtures and multiple WMA mixtures. Different specimen types were also evaluated to capture differences in mix design, quality control/quality assurance, and field performance.
Specimens were evaluated for moisture susceptibility by Indirect Tensile (IDT) Strength, Resilient Modulus (MR) and Hamburg Wheel-Track Testing (HWTT). Specimens for IDT and MR were tested dry and then tested wet after conditioning as described in AASHTO T283 with one freeze-thaw cycle. HWTT was used to assess both moisture susceptibility and rutting potential under repeated loads in the presence of water at elevated temperatures (i.e., 122°F [50°C]), and the output parameters used for evaluation were the calculated Stripping Inflection Point (SIP) and the rut depth at 5000 load cycles.
Based on the results of the laboratory tests performed on PMFC cores acquired at construction and with time, WMA during its early life exhibited inferior moisture resistance when compared to HMA. However, with time, specifically after one summer, the dry and wet properties of WMA became equivalent to those of HMA. For WMA constructed in the fall, the results from this study suggest that the inclusion of recycled asphalt pavement (RAP) or an anti-stripping agent may alleviate possible moisture susceptibility issues in the early life during wet, winter weather conditions.
While some laboratory test results demonstrated that WMA is more moisture susceptible than HMA, field performance reported to date from the three projects used in this study shows no evidence of moisture damage. Therefore the search for a laboratory test to screen mixtures for moisture susceptibility continues.
An alternative approach, applying Griffith crack growth theory and utilizing IDT, MR and air voids% the adhesive bond energy of asphalt mixtures was calculated for Texas field project. This value holds promise for characterizing performance of asphalt mixtures by considering basic properties and grouping into one representative value.
Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/149392 |
Date | 03 October 2013 |
Creators | Garcia Cucalon, Maria Lorena |
Contributors | Epps Martin, Amy L, Epps, Jon A, Glover, Charles |
Source Sets | Texas A and M University |
Language | English |
Detected Language | English |
Type | Thesis, text |
Format | application/pdf |
Page generated in 0.002 seconds