The dissertation thesis is focused on the optimization of control parameters of an EDM machine; the subject of optimization is cutting speed and surface topography. The first part of the thesis contains a research study on the technology of electrical discharge machining with the attention paid to the optimization methods use for control parameters of this process. The second part of the thesis is focused on real application of knowledge gained from studied sources. Here, a design of experiment aim at optimizing the parameters of the EDM machine is designed and carried on to maximize the cutting speed with the highest possible surface quallity. The result of the work is to build adequate regression models and find the optimal setting of machine control parameters.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:446793 |
| Date | January 2021 |
| Creators | Prokeš, Tomáš |
| Contributors | Beneš, Libor, Bednář, Josef, Matoušek, Radomil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0054 seconds