Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2006. / The predominately manual, time-consuming and error-prone procedure currently
used in engineering offices for the calculation of preliminary column forces
in multi-storey buildings constitutes the motive for the research described in this
study. Identifying the current procedure as in need of improvement, techniques
and prototype software posing a semi-automated alternative, are developed.
Influence areas used for load-assignment are established with the use of a
Voronoi diagram calculated for a specific floor geometry. The forces transferred
to the columns are based solely on the size of the influence areas thus calculated.
The definition of the floor geometry, as well as the definition of loads and
other necessary input parameters, are performed in a CAD-system, into which
the Voronoi functionality is integrated.
The accuracy of the forces obtained with the implemented procedure and,
consequently, the accuracy of the forces as they are calculated in current practice,
is determined through comparison with the results of finite element analyses.
The comparative analysis of a sample of typical floor geometries allows an
evaluation of the results and the identification of tendencies observed regarding
the errors obtained.
It is concluded that calculating column forces based on influence areas, i.e.
solving a geometrical problem without taking any stiffness properties into account,
is unsafe. The implication hereof is twofold. Firstly, it serves as a warning
concerning the technique currently used in practice and secondly, it steers the investigation
in the direction of a finite element analysis: using the influence areas
as a basis for automatic meshing, a semi-automated analysis can be performed
relatively inexpensively, using plate elements.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/1509 |
| Date | 12 1900 |
| Creators | Lourens, Eliz-Mari |
| Contributors | Van Rooyen, G. C., University of Stellenbosch. Faculty of Engineering. Dept. of Civil Engineering. |
| Publisher | Stellenbosch : University of Stellenbosch |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Rights | University of Stellenbosch |
Page generated in 0.0028 seconds