This master's thesis has been on modeling, identification and control of a hexarotor system. It has been carried out on behalf of UAS Europe in Link\"{o}ping. A set of non-linear dynamic equations describing the motion of the hexarotor were derived. These equations were then implemented in Matlab/Simulink, which became a good simulation environment for further studies. A decentralized control system using P-PD controllers was successfully implemented in both simulation and on a hexarotor platform. The non-linear simulation model and the hexarotor platform were then identified using black box identification between virtual controls and angular rates. The result from identification of the hexarotor platform was not bad at all, but left some room for improvements. These linear models ware then used to tune the parameters of the inner PD controllers using a method called placement of dominant poles. This method worked well in simulation environment but unfortunately not as well on the real platform.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-109073 |
| Date | January 2014 |
| Creators | Magnusson, Tobias |
| Publisher | Linköpings universitet, Reglerteknik, Linköpings universitet, Tekniska högskolan |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0012 seconds