This thesis deals with research and optimization of process parameters and methodology of production of multimaterial parts manufactured by SLM. This work investigates iron-based and copper-based materials. The aim of the work is to create a good-quality horizontal and vertical multimaterial interface. In the case of the horizontal interface, the optimal process parameters for the processing of selected materials, their subsequent optimization for a goodquality horizontal interface and verification of mechanical properties were experimentally determined. For the vertical interface, it was necessary to design a production methodology and further optimize the process parameters. Finally, some mechanical properties of the interface were determined. However, research of the vertical interface has been a scientific task with some degree of uncertainty, and as this area has not yet been fully explored, it has proved to be a more complex problem than previously thought. It was therefore not possible to completely clarify it in the given time and with the available means. This work provides a detailed description of the mechanisms of creating both types of interfaces and their properties and can serve as a basis for further study of multimaterial 3D printing of metals based on iron and copper.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417566 |
Date | January 2020 |
Creators | Pliska, Jan |
Contributors | Dočekalová, Kateřina, Koutný, Daniel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds