This study determined the polychlorinated dibenzo-p-dioxins/ dibenzo- furans (PCDD/Fs) and 22 metals contents in ash in the super heater (SH), economizer (EC), semi-dryer absorber (SDA), fabric filter (FF), fly ash pit (FAP) and bottom residue (BR) in a municipal solid waste incinerator (KTMSWI).
Experimental results showed that average PCDD/FS contents in ash samples from the SH, EC, SDA, FF, FAP and BR were 0.102, 0.788, 0.210, 1.95, 2.04 and 0.0218 ng I-TEQ /g, respectively. PCDD/Fs content was very low in the SH and BR due to high temperatures (around 461¢XC in the SH and 914¢XC in combustion chamber). Conversely, total PCDD/Fs content was significantly high in ash samples from the EC (around 340¢XC), mainly because the temperature is within the favorable range of 250-400¢XC for PCDD/FS formation due to de nova reformation mechanisms. Although the SDA operated at 245¢XC, the PCDD/FS content decreased very significantly, mainly because the temperature was relatively low and because calcium carbonate was introduced into flue gases to dechlorinate and dilute chlorine-containing species. PCDD/Fs were captured by the active carbon in the FF. Furthermore, the duration that fly ash remained in the FF was longer than that for other incinerator units, and thus causing an increasing trend of PCDD/Fs level downstream (except the SDA). Total PCDD/Fs emission factors (£gg /ton-waste; £gg I-TEQ /ton-waste) in ash samples from different units were: SH (42.3; 0.846), EC (326; 6.12 ), SDA (58.1; 1.10), FF (1540; 61.3), FAP (2950; 107) and BR (537; 4.31). Most PCDD/Fs in ash were contributed by the FF (about 56%), and the generation of PCDD/Fs in ash was significant (about 35%) during the transfer process from different units to the FAP. A strong and positive correlation in a logarithmic form existed between PCDD/Fs and chlorine (Cl-) contents in ash.
The results showed that principal metals in the incinerator ash were Al, Fe, Zn, Ba, Pb and Cu. On average, these six metals accounted for 96.6%, 96.8%, 97.0%, 94.2% and 96.7% of the total metals in SH, EC, SDA, FF and BR ash, respectively. The emission factors of individual metals from different units were obtained. Volatile metals, such as Cd, Sn, Sb, Hg and Pb, were mostly in fly ash, while lithophilic metals, such as Al, Fe, Ti, V, Cu, Mn, Fe, Co, Ni, Cu, Sr, Mo, Ag, Ba and Cr+6 were mainly in bottom ash. Distribution ratios for total metals in SH, EC, SDA, FF and BR ash were 4.87%, 4.26%, 2.89%, 8.17% and 79.81%, respectively. That is, about 20.2% of total metals were in fly ash and most metals (about 79.8%) were in bottom ash. The Pb content in EC ash and Hg content in FF ash were between alarm contents and maximum legal limits, while Cd and Pb contents in FF ash exceeded the maximum legal limits. The existing transportation system for transferring fly ash from different units to a fly ash pit should be modified for recycling the valuable metals. Ash with less than the alarm content for metals content, such as ash from the SH, SDA and BR, can be reused. Ash with metals exceeding the alarm contents, such as ash from the EC and FF, should be collected and transferred to a different fly ash pit for further treatment, such as metal recycling.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0513108-162430 |
| Date | 13 May 2008 |
| Creators | Lin, Yu-Sheng |
| Contributors | Guo-Ping Chang-Chien, Shui-Jen Chen, Jimmy C. M. Kao, Wen-Jhy Lee, Kang-Shin Chen |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0513108-162430 |
| Rights | off_campus_withheld, Copyright information available at source archive |
Page generated in 0.002 seconds