The development of a versatile system capable of providing rapid, portable, and
inexpensive detection of explosives and energetic compounds is needed critically to offer
an enhanced level of protection against current and future threats to homeland security, as
well as to satisfy a wide range of applications in the fields of forensic analysis, emergency
response, and industrial hazards analysis. The hand-held nanocalorimeter will serve as a
first-of-its-kind screening tools for explosive and energetic compounds directly in the
settings where they are needed with high efficiency, reduced cost, and simplicity with ease
of use. Unlike current explosives detectors, this system is based on calorimetric
techniques that are inherently capable of providing direct measurements of energy release
potential and therefore do not depend on prior knowledge of familiar compounds.
The microfabricated calorimetry instrument consists of (i) a thermal control
module incorporating arrays of microfabricated heaters and temperature sensors, as well
as any necessary electronic interconnections, and (ii) a sample encapsulation module
incorporating etched enclosures designed to accommodate either solid or liquid samples. Initial work has led to successful fabrication of a chip capable of sampling nano-sized
solid or liquid compounds. Control algorithms incorporating the DSC principle have also
been written using LabVIEW. Device performance of the original and redesigned chips
were tested by studying the thermal transitions associated with the boiling points of
acetone and pentane. With the redesigned chip, the heat loss issue was reduced: the
measured input heat was reduced from 32 times of the required energy to 5 times of the
required energy. Future work will focus on modifying the chip design and control
algorithm to improve accuracy and sensitivity, developing a trace analysis software to link
it to a database of explosive information, and adapting different fabrication procedures for
high temperature operation and large scale production.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/4834 |
| Date | 25 April 2007 |
| Creators | Liu, Yen-Shan |
| Contributors | Mannan, M. Sam, Ugaz, Victor M. |
| Publisher | Texas A&M University |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | Book, Thesis, Electronic Dissertation, text |
| Format | 835667 bytes, electronic, application/pdf, born digital |
Page generated in 0.0017 seconds