Supercapacitor electrodes were fabricated at a high active mass loading and exhibited enhanced electrochemical capacitance. A conceptually new salting-out extraction processing technique for the synthesis of dispersed Mn3O4-carbon nanotube (CNT) nanocomposites was developed, alleviating the need for hydrophobic solvents. The choice of isopropyl alcohol and NaCl for the extraction process offer advantages of an easy upscaling of this process. The salting out technique was shown to work with Octanohydroxyamic acid (OHA) and Lauryl Gallate (LG) as extractors and dispersants, critical to the success of the extraction. Mechanisms for surface adsorption on Mn3O4 and CNT for both OHA and LG are discussed. A secondary project was also undertaken, to investigate the use of chlorogenic acid and 3,4,5 – trihydroxybenzamide, as co-dispersing agents for MnO2 and CNTs. These molecules are used due to their unique structural properties, which are discussed. The electrodes fabricated using these co-dispersants showed significant increases in their specific capacitances and SEM imaging indicated improved mixing, compared to samples prepared without dispersants. A specific capacitance of 6.5 F g-1 was achieve at low electrical resistance, attributed to the microstructure of electrodes prepared with the co-dispersant molecules. / Thesis / Master of Applied Science (MASc) / The ever-growing realization that our energy consumption as a civilization is not sustainable, has fueled people around the globe to imagine and design new methods of energy storage, in attempts to mitigate this issue. From the foundational works of scientists, it has become clear to see that there is not “one right answer”. Instead, the unique benefits and drawbacks of energy storage technologies should be balanced and applied in situations where their properties permit a high efficacy. The intention of this work is to assist in the development of new materials to be used for energy storage devices called electrochemical supercapacitors. Novel colloidal processing techniques were developed, leading to the fabrication of high-performance electrodes, and providing further insight to the structure-properties relationship of organic extractors and co-dispersing agents for the design of nanocomposites.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/26370 |
| Date | January 2021 |
| Creators | Rorabeck, Kaelan |
| Contributors | Zhitomirsky, Igor, Materials Science and Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0013 seconds