Water utilities in Nova Scotia face numerous challenges treating low turbidity water and complying with stringent guidelines and treatment standards. Problems associated with the treatment of low-turbidity water are not confined to Nova Scotia; several other provinces, British Columbia, Manitoba and Ontario share similar water characteristics of drinking water sources. The treatment of low turbidity water is a challenge for these utilities as it requires maintaining the appropriate coagulant dosage that will ensure adequate particle and natural organic matter removal, while at the same time not enhancing the formation of disinfection by-products. Another concern associated with the treatment of such water is that when the particle content of the water is very low, charge neutralization will not be effective due to the weak contact between destabilized particles. Currently, nanoparticles are not regulated as water contaminants, and thus it is unclear whether the existing filtration treatment practices are capable of removing them from drinking water. Obtaining in-depth information on nanoparticle characteristics in drinking water sources will provide a valuable resource that can assist in the development of future treatment strategies.
In this research, characteristics of four synthetic nanoparticles cerium dioxide (CeO2), ferric oxide (Fe2O3), silicon dioxide (SiO2) and titanium dioxide (TiO2) were investigated in Milli-Q water for particle size, surface area, and surface potential using different characterization techniques. Water samples from Pockwock Lake were also characterized for naturally occurring nanoparticles. After initial testing, titanium dioxide (TiO2) nanoparticles were selected to examine particle removal at bench-scale filtration experiments, under operating conditions similar to those practiced at the J.D. Kline Water Supply Plant, Halifax, NS, Canada. Filter performance for the deposition of TiO2 nanoparticles was evaluated through the calculation of its attachment efficiency and coefficient under various water chemistry conditions. The calculated filter efficiency was then applied to simulate natural nanoparticles removal from water.
The results of the research indicate that the investigated nanoparticles behaved similar to natural particles and formed aggregates with larger particle sizes in Milli-Q water. Among the tested nanoparticles, only titanium dioxide could be coagulated with alum, as its negative surface charge and zero point of charge were closer to that of alum. Filtration experiments revealed that TiO2 nanoparticles, when present in water, could successfully be removed by an alum dose of 8 mg/L. Indeed, removal in excess of 99.5% was achieved under the study conditions. Under the investigated water chemistry conditions, very low attachment efficiencies (?) of 0.001, 0.002 and 0.01, and filter coefficients (?) of -0.003, -0.001 and -0.02 were determined for the filters. Based on the calculated attachment efficiencies, and under the studied conditions, natural nanoparticles remain dispersed in the water and would not likely to be removed by direct filtration. The overall research findings represent a major step forward in nanoparticle removal by direct filtration.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:NSHD.ca#10222/15543 |
| Date | 30 August 2012 |
| Creators | Elsadig, Abdallah |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
Page generated in 0.0016 seconds