ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / As requirements for the amount of test data continues to increase, instrumentation engineers are under pressure to deploy data acquisition systems that reduce the amount of associated wiring and overall system complexity. Smart sensor buses have been long considered as one approach to address this issue by placing the appropriate signal conditioners close to their respective sensors and providing data back over a common bus. However, the inability to adequately synchronize the operation of the sensor bus to the system master, which is required to correlate analog data measurements, has precluded their use. The ongoing development and deployment of smart sensor buses has reached the phase in which integration into a larger data acquisition system environment must be considered. Smart sensor buses, such as IntelliBus™, have their own unique mode of operation based on a pre-determined sampling schedule, which however, is typically asynchronous to the operation of the (master or controller) data acquisition system and must be accounted for when attempting to synchronize the two systems. IRIG Chapter 4 type methods for inserting data into a format, as exemplified by the handling of MIL-STD-1553 data, could be employed, with the disadvantage of eliminating any knowledge as to when a particular measurement was sampled, unless it is time stamped (similar to the time stamping function that is provided to mark receipt of 1553 command words). This can result in excessive time data as each sensor bus can manage a large number of analog sensor inputs and multiple sensor buses must be accommodated by the data acquisition system. The paper provides an example, using the Boeing developed IntelliBus system and the L3 Communications - Telemetry East NetDAS system, of how correlated data can be acquired from a smart sensor bus as a major subsystem component of a larger integrated data acquisition system. The focus will be specifically on how the IntelliBus schedule can be synchronized to that of the NetDAS formatter. Sample formats will be provided along with a description of how a standalone NetDAS stack and an integrated NetDAS-IntelliBus system would be programmed to create the required output, taking into account the unique sampling characteristics of the sensor bus.
| Identifer | oai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/604924 |
| Date | 10 1900 |
| Creators | Dehmelt, Chris |
| Contributors | L3 Communications |
| Publisher | International Foundation for Telemetering |
| Source Sets | University of Arizona |
| Language | en_US |
| Detected Language | English |
| Type | text, Proceedings |
| Rights | Copyright © International Foundation for Telemetering |
| Relation | http://www.telemetry.org/ |
Page generated in 0.0021 seconds