Developing successful new products in New Zealand Small and Medium Enterprises (SMEs) is difficult due to several factors. These include greater expectations, new technology, reduced product lifecycles, high project failure rates, and the pressures from competition. This presents a significant challenge for a product development team as it leaves companies searching for opportunities to gain an advantage in the market place. The low level of research performed in relation to SMEs over the past number of years, especially in the field of New Product Development (NPD), has resulted in an increase in interest by practitioners and academics. This research was aimed at exploring the pre-development phase currently employed by SMEs within the New Zealand manufacturing industry. The purpose was to gauge the understanding and importance of this early stage in NPD amongst practitioners from these SMEs, as the literature highlighted this as an area of weakness requiring empirical research. Specifically, the objectives set for this research investigation were to survey manufacturing SMEs in New Zealand, compare the findings with past and current research on a national and international level, and make conclusions in relation to: • The nature and complexity of the pre-development activities performed by New Zealand manufacturing SMEs. • The difficulties and/or limitations New Zealand manufacturing SMEs encounter whilst implementing the pre-development activities. • The importance of and attitude towards the pre-development phase with regards to the overall NPD process and the company’s product development efforts. The study consisted of a questionnaire survey, run during June and July 2007 with twenty-two SMEs representing the light engineering/manufacturing, electronics, and food industry sectors. The questionnaire survey was followed up with one-on-one interviews with some of the participating companies allowing for both quantitative and qualitative data to be obtained. The research investigation found that the difficulties in carrying out the five predevelopment activities studied were common, compounded by the lack of skills inhouse to do so. Of the five pre-development activities studied, the preliminary technical analysis was found to be given the most attention by the companies with regard to overall project time, with lesser emphasis placed on the other four activities. Many of the companies developed ‘new to the world’ products or entered new markets with existing products where they primarily took part in the business-tobusiness market. Good relationships existed between the manufacturing SMEs and their suppliers, distributors and customers. Management were found to have a high level of involvement in product planning, as they tend to be involved in key decision making in NPD in SMEs. Many of the companies had difficulty when it came to identifying opportunities and customer needs, with the addition of numerous barriers limiting the implementation of NPD. The greatest difficulties arose during the practical implementation of tools and techniques due to several challenges, such as limited budgets, lack of time and resources as well as incompatibility within the existing company culture. Clearly, the pre-development phase is the basis for the remainder of the NPD process with essential development decisions being made here. This phase is therefore crucial in determining the likely outcome of NPD projects. The research findings suggested that greater consideration and effort should be placed on the pre-development phase, even more so with the cost increasing exponentially when mistakes are made later in development. The study highlighted the need to improve the tools and techniques available for use during the pre-development phase, as companies are aware of its importance but find it the most difficult to undertake. High new product failure rates; over-expenditure of project time; lack of awareness, commitment, and formality; and the high level of difficulty experienced by the New Zealand SMEs studied, suggests there is a need for the implementation of better tools and techniques during the predevelopment phase to aid successful NPD in New Zealand manufacturing SMEs.
| Identifer | oai:union.ndltd.org:ADTP/232937 |
| Date | January 2008 |
| Creators | Baier, Warren Arthur |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
Page generated in 0.0019 seconds