The thesis is concerned with relationships between progressive technological processes of spheroidal graphite cast iron’s production and their structural properties. The aim of the work is to explain causal relationship between parameters of the proposed manufacturing technology of the iron type given (involving selected variants of modification and inoculation of melt and the parameters of melt crystallization, solidification and cooling down in a mould), their structure and even chemical heterogeneity of elements in this structure. For close specification of presented relationships three-dimensional model of spheroidal graphite growth was used, which was developed at the Brno University of Technology, Faculty of Mechanical Engineering. Its usability in praxis has been verified on the basisis of the application of this model on experimentally acquired data. The U GRAFIT 20 model of the authors Stránský and Million counting segregation in the frame of eutectic cell has not still been used for prediction of segregation in real condition in greater extent. On the basis of the above mentioned model microsegregation within “on average” of the cell has been discovered during experimental melts. Microsegregation has been described by segregation and heterogeneity indexes. Calculated values of segregation and heterogeneity indexes have been compared with experimentally verified values. On the basis of comparison of calculated and measured values the possibility of further usage of the mentioned model in praxis has been explored.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233882 |
Date | January 2010 |
Creators | Musilová, Iveta |
Contributors | Mores, Antonín, Pacal, Bohumil, Šenberger, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds