In this master’s thesis, a turbine model and a common control structure for theturbocharger for SI and CI-engines is developed. To design the control structure,simulations are done on an existing diesel engine model with VGT. In order tobe able to make simulations for engines with a wastegated turbine, the model isextended to include mass flow and turbine efficiency for that configuration. Thedeveloped model has a mean absolute relative error of 3.6 % for the turbine massflow and 7.4 % for the turbine efficiency. The aim was to control the intake manifoldpressure with good transients and to use the same control structure for VGTand wastegate. By using a common structure, development and calibration timecan be reduced. The non-linearities have been reduced by using an inverted turbinemodel in the control structure, which consists of a PI-controller with feedforward.The controller can be tuned to give a fast response for CI engines and a slowerresponse but with less overshoot for SI engines, which is preferable.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-70288 |
| Date | January 2011 |
| Creators | Lindén, Erik, Elofsson, David |
| Publisher | Linköpings universitet, Institutionen för systemteknik, Linköpings universitet, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0029 seconds