Return to search

Stanovení anizotropie tepelné vodivosti polymerních chladičů pro chlazení elektroniky / Determination of thermal conductivity anisotropy of polymeric heatsinks for electronics

The master's thesis focuses on creating a numerical model of a polymeric heat sink with emphasis on its significant thermal conductivity anisotropy. This anisotropy is caused by highly thermally conductive graphite filler. Its final orientation is given by the melt flow inside the mould cavity during injection molding. The numerical model is created on the basis of a heat sink prototype subjected to experimental measurements, whose physical conditions are reliably replicated by the model. The determination of anisotropy is divided into two parts. The qualitative part is based on the fracture analysis of the heat sink prototype and determines the principal directions of the conductivity tensor in individual sections of the geometry. The computation of principal conductivities falls into the quantitative part, in which this task is formulated as an inverse heat conduction problem. The input data for the proposed task are experimentally obtained temperatures at different places of the geometry. The values of principal conductivities are optimized to minimize the difference between the measured and simulated temperatures.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:445460
Date January 2021
CreatorsBrachna, Róbert
ContributorsKůdelová, Tereza, Komínek, Jan
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0021 seconds