3D printing technology, which has its origins in rapid prototyping, is increasingly used to build functional devices. Although 3D printing technology has been well developed for thermoplastic polymers and metals, it is still in the research phase for soft polymeric materials such as silicones. Silicones are an industrially vital polymer characterized by a broad spectrum of chemical and physical properties for several smart applications, including on skin printing, smart sensors, multigradient material, and soft actuators. Extrusion-based multimaterial printing is one of the 3D printing techniques that have been adapted due to its compatibility to process silicone-based materials for constructing various functional devices. However, there are several challenges such as achieving on the fly mixing at low Reynolds numbers regime, achieving fast switching while using Newtonian/non-Newtonian inks, and achieving multimaterial printing on nonplanar surfaces. The development of suitable and robust printheads that are able to tackle those challenges can expand the application of this technology to a wide range of fields. In this thesis, several deposition-controlled printhead designs have been created for 3D printing multifunctional devices using an understanding of microfluidics. The established printhead can be controlled to formulate different multigradient structures through on the fly mixing during the material printing. Moreover, the developed printhead can be adapted to print multi viscous inks with high switching rates up to 50 Hz. Through the developed system, the printhead was able to track topologies in real-time, allowing objects to be printed over complex substrates. These new capabilities were applied to fabricate functional structures in order to demonstrate the potential of the developed printhead approaches that can be used in various applications, including smart sensors, soft robotics and multigradient objects. / Thesis / Doctor of Philosophy (PhD) / 3D printing techniques, such as extrusion-based multimaterial printing, have recently been utilized to process silicones due to their versatility in different smart applications, including multigradient material and soft actuators. Although it represents significant progress, there are still several challenges, including the proper mixing during printing with a laminar flow regime, the fast switching between different inks, and the printing over complex topographies. Therefore, various printhead designs have been developed in this thesis to tackle these challenges. In particular, a mixer printhead has been designed to allow mixing during printing for building multigradient objects. Also, a scalable printhead has been developed to allow fast switching for creating pixelated structures. Finally, a simple mechanical system has achieved multimaterial printing over various nonplanar surfaces. To the best of the author's knowledge, the developed printheads can be used in many fields, such as soft robotics and smart devices.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/27509 |
| Date | January 2022 |
| Creators | Hassan, Islam |
| Contributors | Selvaganapathy, Ravi, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds