Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:265675 |
Date | January 2017 |
Creators | Kudličková, Jitka |
Contributors | Šiška, Radek, Strnad, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds