In this Ph.D. thesis, we have carried out 2D numerical simulations to study the influence of dielectric surfaces on the propagation dynamics of plasma discharges at atmospheric pressure. First we have improved the computational efficiency of the discharge code used in this work in implementing parallelization techniques and more efficient numerical schemes. Second we have studied the dynamics of an air discharge at atmospheric pressure in a point-to-plane geometry with a dielectric layer on the cathode plane. Then, we have studied the influence of a dielectric layer obstacle in the inter-electrode gap. We have shown that depending on the characteristics of the dielectric layer and the amplitude and polarity of the applied voltage, a second discharge may reignite or not below the dielectric in the second air gap. The comparison of simulation results with experiments has shown that in a point-to-plane geometry with a sharp point and a high over-voltage, a single conical discharge structure is observed. A good agreement on the discharge diameter and propagation velocity has been obtained. With a dielectric obstacle in the gap, the simulated reignition dynamics is faster than in the experiments. To improve the agreement, we have studied the influence of several physico-chemical processes. Finally, we have studied the dynamics of discharges in dielectric tubes at atmospheric pressure. For a He -N2 mixture, we have put forward the importance of three body reactions. Last, the influence of the tube radius on the structure of discharges in He - N2 and air is discussed.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00978523 |
| Date | 19 December 2013 |
| Creators | Pechereau, François |
| Publisher | Ecole Centrale Paris |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0014 seconds