This work deals with the thermal load during cut-off grinding of high-strength bearing rings. Linear cut-off operations lead to a high rise in temperature over the cutting process. These leads, together with the limited material volume, in a heat build-up and the resulting grinding burn. The aim of this work was to prevent this head build-up by using two-axis cut-off operations. Therefore, known methods were theoretically considered and from this, alternative two-axis strategies were determined. For testing, experiments were carried out on a test set-up developed in this work. The tests showed that the two-axis strategies lead to significantly reduced temperatures, as well as non-grinding burn and partially burr-free cutting surfaces. However, the two-axis methods lead to increased process times, which is why approaches for their optimization have been discussed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:263399 |
Date | January 2016 |
Creators | Felgentreu, Sven |
Contributors | Blecha, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds