Return to search

Adaptations: an office building in Vancouver

This thesis project began with an interest in how architecture provides for both permanence
and temporality and how contemporary conditions may impact upon architectural form. An, office
building was chosen as the subject of exploration due to its ubiquitous nature and the requirement
that it be adaptable to the changing needs of its occupants. The need for a flexible and economic
architecture also presented the problem of anonymity and a lack of experiential richness. The
intention of the investigation was to discover in what ways, if any, the permanent and temporal
elements of a building might act in conjuction to create an enduring artifact which could respond to
and register the complexities of everyday life.
The project was inspired by observations in the city of Vancouver where development has
occurred in a rapid and often irregular manner. The eastern part of the downtown centre and
Yaletown were identified as particular areas of study. Patterns of development exhibit many
smaller sites left empty or used as parking until being developed. These sites revealed an
opportunity for the design of a medium-sized building which might maintain the smaller grain
characteristic of these areas. As a "type", it could be adapted to the particularities of its location as
well as the changing requirements of its occupants. A number of sites from four to six lots in width
were identified in the study area. Various configurations were then devised to adapt the building
model to particular site conditions including double party-wall versus corner locations and
different orientations.
The final project consists of the adaptation of this type to a site located on Homer Street near
Pender Street. It is adjacent to an alley which marks the change in grid orientation in the area and
allows three elevations of the building to be explored . The building employs an asymmetrically
situated atrium and a core divided into two separated pods which would allow for increased
penetration of natural light and ventilation. Structure, envelope and space dividing elements
operate independently. The building envelope is separated out into two layers: the interior layer
consists of a four foot wide grid of openings which may be filled with birch clad panels, bookcases or
glazed panels or fitted with operable louvered windows. Random placements of panels allow the
human inhabitation to be registered on the exterior of the building. The exterior skin then
superimposes a composition of glazed panels which responds to the scale and order of the city and
deals with environmental elements. A carved out entry lobby and two storey terrace along with
landscaped roofdeck provide gradations of public and private common areas. / Applied Science, Faculty of / Architecture and Landscape Architecture (SALA), School of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/8132
Date11 1900
CreatorsHayden, Michele Andrea
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
Format1115761 bytes, application/pdf
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0018 seconds