Return to search

Nelineární obvody s řízenými proudovými zdroji / Non-linear Circuits with Controlled Current Sources

This thesis treats of problems of nonlinear circuits. In introduction the basic possibilities of solving nonlinear circuits are described. Then the basic information on modern current active elements is mentioned, for example current follower, current operational amplifier and current conveyor. In the next part of this thesis the problem of real characteristics of semiconductor diodes is described, major attention is focused on reverse recovery time. Three various types of circuits with nonlinear elements are described in this masters thesis. The first type of circuits are diode precision rectifiers, the full-wave rectifiers containing voltage operational amplifier are most explored, current follower and other active components are described in previous chapters. Simulations in PSpice were executed for each of these circuits. Then the attention was devoted to increase of maximum working frequence. The minimum necessary amplitude of input signal was also analyzed. In the following part two designs of diode function converters are processed, function converter with voltage operational amplifier and function converter with current follower. For each of the diode function converters designed, simulations were executed to find their real properties. The variety of diode voltage limiters and diode current limiters are the third type of nonlinear circuits described, from which the upper limiter and double limiter are investigated in more detail. Simulations were executed for all limiters and their functionality and problems connected with their usage for limitation of high frequency signals were analyzed. In the last part of the thesis there is described the practical realization of precise rectifier, which showed the best ability to process high frequency signals of all investigated circuits. This circuit was realized so that it is able to operate in current and mixed mode. Measured values of real circuits were compared with values gained from the simulations.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218343
Date January 2010
CreatorsDolák, Jan
ContributorsHanák, Pavel, Kubánek, David
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0014 seconds