Return to search

Evaluate Operational Modal Analysis and Compare the Result to Visualized Mode Shapes

The prototypes vibration test carried out for obtaining reliable information concerning machine’s dynamic properties in development process. Analysis results should be able to correlate with FE model to determine if some underlying assumptions (material properties & boundary conditions) were correct. EMA used for extracting structure modal parameter under laboratory condition. However, EMA can generally not provide all required information concerning machine dynamic property. To simulate vibration in operating, it commonly requires the model based on dynamic properties of the machine under operating. Thus, vibration tests need carried out under operational condition. OMA is a useful tool for extracting information concerning dynamic properties of operating machine. This report concerns vibration test of part of mining machine under operating condition. Modal parameters extracted by two kinds of OMA methods. Results from OMA was compared with corresponding EMA results, illustrates reader the advantages of OMA.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:bth-15599
Date January 2017
CreatorsSong, Baiyi
PublisherBlekinge Tekniska Högskola, Institutionen för maskinteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0024 seconds