Return to search

Diagnostika depozice tenkých vrstev připravovaných z dimethylphenylsilanu / Diagnostics of thin layer deposition using dimethylphenylsilane monomer

The aim of this thesis is a study of processes during organosilicone thin film deposition via plasma polymerization. Recently, thin films are the most expanding way of surface modification of materials. They are used as protective coatings, functional layers, they can increase or decrease adhesion to different compounds (e.g. water), or just improve mechanical properties of bulk materials. Plasma polymers, which are not known so long, are a modern trend in evolution of thin film deposition. They have perfect adhesion to the substrate and they are highly resistant against most of chemical compounds. Their structure is quite different from the structure of classical polymers. Recently, organosilicon compounds are used as precursors for plasma polymers because silicon built in the structure of plasma polymer allows thin film deposition on glass substrate and the organic part of monomer gives us infinite possibilities of modification. In our case dimethylphenylsilane (DMPS) was used as a monomer. Various RF low pressure discharges were used during this study. Plasma diagnostic was performed by optical emission spectroscopy of inductive coupled plasma. This method allows us to determine plasma composition during the deposition process. Thus we can predict the composition of deposited thin film according to input parameters. From relative populations of fragments we are able to find out optimal conditions for deposition process. We can also calculate temperature of particles in plasma which gives us some information about particle energies. The first part of the study deals with the identification of particles (fragments) created by fragmentation of monomer in plasma environment. We successfully identified hydrogen atomic lines of Balmer’s series in the spectra. Many rotational lines of hydrogen molecule were also detected. Atomic carbon occurred only in small amount. Much more carbon was detected in the form of CH radical. We also found some weak lines connected to atomic silicon. When we used a mixture of DMPS and oxygen, OH radical and O2+ were present in spectra. Next, optimal settings of deposition were determined for particular fragments from relative intensities of these fragments in optical emission spectra. Using this information we are able to set up the process to deposit thin films of desired composition and properties. We calculated electron temperature from intensities of hydrogen lines in Balmer’s series. Rotational temperature was obtained from CH radical intensity. Unfortunately, there was no convenient radical from which intensity we would be able to calculate vibrational temperature. All results and information obtained during the research can be used in industrial plasma polymerization processes and development of new coatings and functional thin films. Other studies on DMPS or similar monomer may also be realized to get more knowledge about processes in plasma and this thesis could serve as a basis for further research. Moreover, this study is a part of an international project. The aim of this project is to study processes during plasma polymerization both theoretically and practically. Once finished, the project and its results will be presented in scientific literature and at international conferences.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216672
Date January 2010
CreatorsProcházka, Michal
ContributorsKudrle, Vít, Krčma, František
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0019 seconds