Some pages are blank, but are kept to satisfy the page count of the thesis. / <p> Indoor optical wireless links can potentially achieve high bitrates because there is a wide and unregulated bandwidth in the optical spectrum. Moreover, optical wireless links can be implemented using simple and inexpensive devices. However, indoor optical wireless links have their own drawbacks such as limited power due to safety issues and incapability of passing thorough opaque objects, which limit their mobility, range and bandwidth and have prevented them from being used widely in commercial systems. Therefore, there has been
much effort to find new configurations for indoor optical wireless links which are able to overcome these limitations. In this thesis, a novel configuration for indoor optical wireless communication, termed the dynamic spot diffusing (DSD) channel, is proposed. In the DSD system, the transmitter sends optical signals to a small moving area on the ceiling termed a spot. The receiver receives reflections of optical signal from the spot when spot is in field of view of the receiver. This configuration is shown to achieve high bitrates and provide a good deal of mobility for users inside the room. In this work, a theoretical model for the DSD channel is proposed and the DSD channel capacity is discussed and computed. Furthermore, the DSD system design is explained and design issues are discussed in order to approach capacity. Finally, using computer simulations, achievable rates inside a room are computed and shown to be close to calculated channel capacity.</p> / Thesis / Master of Applied Science (MASc)
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/21856 |
Date | 11 1900 |
Creators | Khozeimeh, Farhad |
Contributors | Hranilovic, S., Electrical and Computer Engineering |
Source Sets | McMaster University |
Language | en_US |
Detected Language | English |
Type | Thesis |
Page generated in 0.0017 seconds