This master’s thesis is concerned with analysis of cabling and cabling systems in data center and with their projection as follows. The part of the work is aimed at the measurement parameters of metal cables which are used in data center with noise. The first part is focused on analyzing the structure of the data center and cabling used in it. The structure of the data center is based on the TIA-942 and consists of an entrance room, main distribution area MDA, horizontal distribution area HDA , zone distribution area ZDA and the equipment distribution area EDA. Divided into backbone cabling and horizontal cabling and use standard and pre-terminated cabling. The measurement results of structured metal cabling with noise are discussed in the next part. There were used these types of cables UTP, FTP and S/FTP. The measurement was performed in the electricity substation and in the laboratory of electromagnetic compatibility. The third part of this work deals with the actual design of structured cabling for the data center. In the first design we use the standard installation, the second preterminated cabling. For both types of installation cost statement is processed (CAPEX). Thesis is also completed with DC design drawings and rack drawings.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219768 |
| Date | January 2012 |
| Creators | Hejtmánek, Ondřej |
| Contributors | Dostál, Otto, Filka, Miloslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds