Indiana University-Purdue University Indianapolis (IUPUI) / This investigation was designed to compare the force (grams) required to overcome a simulated cuspid retraction assembly capable of three dimensional control during the retraction process. It was hypothesized that a significant difference in the mean retraction values exists between the newer orthodontic alloys of Nitinol, Beta-Titanium, as well as Stainless Steel.
One hundred eighty bracket and archwire combinations were examined as follows:
Sample # Wire Cross-section Wire Material
30 .016”x.022” Stainless Steel
30 .017”x.025” ”
30 .016”x.022” Nitinol
30 .017”x.025” ”
30 .016”x.022 Beta-Titanium (TMA)
30 .017”x.025” ”
A statistically significant difference was shown to exist between all six groups examined regarding the variables of wire size and wire material.
The statistical analysis revealed that increasing rectangular archwire cross-sectional size from .016"x.022" to .017"x.025” rectangular wire when simulating canine retraction using an .018" slotted Lewis bracket will lead to significantly greater functional forces. The analysis of wire materials indicated that a significant difference (p=.01) exists between rectangular Beta-Titanium (TMA), Nitinol, and stainless steel during simulated cuspid retraction utilizing a narrow .018" Lewis bracket ligated with A-lastik ligatures.
The least frictional force was observed with the .016"x.022" stainless steel test cells. The largest frictional force was found in the .017”'x.025" Beta-Titanium retraction specimens. Nitinol revealed force data intermediate between stainless steel and Beta-Titanium.
The maximum resistance assembly developed 2.3 times the minimum frictional force observed.
The mean grams of frictional force within these test cells ranged from 55.03 grams for the .016"x.022" retraction assembly to 132.68 grams for the .017"x.025" Beta-Titanium assembly.
A topographical scanning electron microscope survey of the brackets and archwires utilized was included to provide qualitative insights into the quantitative results described.
| Identifer | oai:union.ndltd.org:IUPUI/oai:scholarworks.iupui.edu:1805/34152 |
| Date | January 1982 |
| Creators | Allai, W. Wesley |
| Contributors | Garner, LaForrest D., Sondhi, Anoop, Shanks, James C., Swartz, Marjorie L., Barton, Paul |
| Source Sets | Indiana University-Purdue University Indianapolis |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds