The initial design of an OFDM transceiver is described and the simulations using MATLAB’s Simulink Software and other FGPA based tools are presented. All components of a modern OFDM system were implemented in Simulink to provide an understanding of the various components of an OFDM system, provide a proof of concept in the design, and measure the theoretical performance of the system. In an effort to build the transceiver, the FFT and randomizer components were implemented in verilog and were successfully simulated using ModelSim Altera Starter Edition 6.5b. A commercially available OFDM core, which did not include forward error correction, was simulated to measure the performance of an OFDM system within Altera Stratix III devices and determine the overall logic utilization for OFDM modulation and demodulation. The goals of this report are to describe in detail the general effort made by the author to build an OFDM transceiver and serve as a driver for its eventual FPGA implementation. / text
Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2010-05-1208 |
Date | 22 November 2010 |
Creators | Thacker, Corey McKinney |
Source Sets | University of Texas |
Language | English |
Detected Language | English |
Type | thesis |
Format | application/pdf |
Page generated in 0.002 seconds